Leave Your Message
Explore our top-tier basalt fiber materials engineered specifically to replace or enhance steel reinforcement in chemical pipelines, storage tanks, and high-corrosion industrial environments.
Basalt Fiber Surfacing Tissue Mat is a non woven thin sheet engineered to provide a smooth resin rich surface layer for fiber reinforced plastic ...
Our high performance Basalt Fiber Mesh provides a superior reinforcement solution for concrete and plaster applications where high alkali resista...
Our Basalt Fiber Needled Mat is a high density insulation material manufactured by mechanically bonding continuous basalt fibers without any chem...
Our Basalt Fiber Twisted Yarn is engineered by twisting multiple continuous filaments to enhance mechanical strength and processing stability for...
Industrial containment systems, particularly chemical pipelines and storage tanks, represent the backbone of the global petrochemical, wastewater treatment, and chemical processing sectors. Historically, steel reinforced concrete has been the standard structural material for these heavy-duty installations due to its high load-bearing capacity and cost-effectiveness. However, the commercial and industrial reality of using traditional steel reinforcement in chemically aggressive environments has presented severe, multi-billion-dollar challenges.
In chemical pipelines and storage tanks, the concrete structure is constantly exposed to harsh substances, including strong acids, alkalis, saline solutions, and volatile organic compounds (VOCs). Traditional steel rebar inside the concrete is highly susceptible to electrochemical corrosion. As chemicals penetrate the porous concrete matrix, they react with the steel, causing it to rust, expand, and crack the surrounding concrete from within. This degradation leads to structural failure, catastrophic leaks, environmental contamination, and unscheduled plant shutdowns.
Corrosion costs the global industrial sector over $2.5 trillion annually. Chemical containment facilities bear a significant portion of this burden through constant maintenance, structural rehabilitation, and protective coating applications.
Environmental protection agencies worldwide are tightening regulations on chemical leaks. Traditional steel reinforced concrete structures require frequent inspections and secondary containment linings to meet zero-leakage mandates.
To mitigate corrosion, the industrial trend is rapidly shifting toward fiber-reinforced concrete (FRC) and fiber-reinforced polymer (FRP) rebars. Basalt fiber, derived from volcanic rock, has emerged as the premier alternative due to its inert chemical nature.
Today, the integration of Basalt Fiber Reinforced Polymer (BFRP) and basalt chopped strands into concrete formulation represents the cutting edge of industrial engineering. Unlike steel, basalt fiber does not rust, has a tensile strength three times that of structural steel, and shares a thermal expansion coefficient highly compatible with concrete. This ensures that chemical storage tanks and pipelines remain structurally sound for decades without the need for expensive cathodic protection or recurring epoxy coatings.
China Beihai is founded in 2015 and located in Jiujiang, Jiangxi Province. China Beihai is a high-tech enterprise focusing on the research, development, production and sales of high-performance basalt continuous fiber and its production equipment manufacturing, as well as a leading enterprise in the domestic basalt fiber industry.
View More
At China Beihai group, we specialize in the production of a wide range of products including basalt fiber mat (Basalt fiber chopped strand mat,Basalt fiber cloth ), basalt fiber roving, basalt fiber yarn, basalt fiber chopped strands, and basalt fiber products Basalt Fiber rebar, basalt fiber sleeves and tape ). Our products are designed to meet the diverse needs of various industries, providing high-quality solutions for our customers.
At China Beihai group, we are dedicated to the production of a wide array of basalt-based products, ranging from basalt fiber mat, fabric, and roving to chopped strand and specialized construction materials. Our focus is on delivering high-quality, sustainable solutions for industries such as construction, geotechnical engineering, and manufacturing. With a commitment to innovation and excellence, we strive to cater to the unique requirements of our clients by offering a comprehensive selection of basalt-derived products.
Choosing to work with China Beihai means working with a leading manufacturer of basalt products. Our commitment to quality, innovation and sustainability sets us apart, ensuring our customers receive best-in-class solutions for their diverse needs. Reliability and customer satisfaction, we offer a wide range of high-quality basalt materials and construction products, backed by our dedication to excellence and industry expertise. When you partner with China Beihai, you can trust that you are working with a reliable and A forward-thinking partner. A thought supplier for all your basalt product needs.
To fully appreciate the transition from traditional steel reinforced concrete to basalt-reinforced systems, we must analyze the specific mechanical and chemical demands of industrial containment structures. Below, we dissect three critical application scenarios where basalt fiber reinforcement solves the engineering limitations of steel.
Industrial pipelines carrying chemical effluents, municipal wastewater, or acidic runoff are subjected to constant internal hydrostatic pressure and external soil loading. When steel reinforced concrete pipes are used, hydrogen sulfide gas (H2S) in wastewater often converts to sulfuric acid, which rapidly corrodes both the concrete matrix and the internal steel cage.
By incorporating basalt fiber chopped strands directly into the concrete mix, manufacturers create a three-dimensional reinforcement network. These micro-fibers prevent the formation of shrinkage cracks, reducing the concrete's permeability. Furthermore, replacing steel rebar with basalt fiber rebar ensures that even if acidic solutions penetrate the outer concrete skin, no corrosive reaction occurs, maintaining structural integrity and preventing environmental leakage.
Large-scale storage tanks holding industrial chemicals, brine, or petroleum products are under continuous hoop stress (tensile stress acting circumferentially). Traditional steel rebar is prone to localized corrosion at joint interfaces, which can lead to sudden, catastrophic wall failure.
Using Basalt Fiber Rebar as the primary reinforcement in tank walls provides the necessary tensile strength to withstand high hydrostatic pressures. Additionally, basalt fiber mesh can be applied to secondary containment dikes (the safety barriers surrounding chemical tanks). In the event of a primary tank failure, these dikes must contain hazardous chemicals without cracking or leaking. Basalt-reinforced containment zones offer the chemical inertness required to securely hold aggressive chemicals until recovery operations are complete.
The table below highlights the physical and chemical properties that make basalt fiber reinforcement the superior choice for chemical pipelines and storage tanks compared to traditional steel reinforcement.
Basalt fiber is ideal for your engineering projects. Its high strength, corrosion resistance and lightweight properties allow it to easily solve a variety of challenges. In buildings, bridges, roads and other infrastructure projects, basalt fibers demonstrate outstanding performance, extending structural life and reducing maintenance costs. Choose basalt fiber, choose reliability and durability.
Basalt Fiber Rebar for Reinforcement in Concrete Construction. Basalt fiber rebar is a high-strength alternative to traditional steel bars and is used in a wide range of applications for reinforcing concrete structures in various fields, and its excellent performance makes it ideal for a variety of construction applications such as bridges, highways, buildings and other infrastructure projects.
Our basalt fiber products are manufactured using advanced thermal melting processes. The resulting continuous roving is fabricated into high-tensile rebars, structural meshes, and chopped strands designed to replace corrosive steel reinforcements. This technology ensures maximum durability in aggressive chemical containment structures, marine environments, and high-stress civil infrastructure.
From civil engineering to aerospace and petrochemical containment, China Beihai’s basalt fiber solutions deliver unmatched performance across diverse sectors.
Our basalt products have diverse applications in the field of house construction.
In the aerospace field, basalt fibers are ideal for manufacturing aircraft wings and engine components.
Used in spacecraft shell materials, thermal protection systems, and engine components.
Basalt-added concrete offers increased strength, crack resistance, and chemical resistance.
Meeting lightweight vehicle trends through strong, reliable basalt fiber composites.
Protects bridge structures from vehicle collisions, fire, corrosion, and nature.
The corrosion resistance of basalt fiber gives it a unique advantage in this field.
Lightweight, high strength, acid, alkali, and marine salt spray corrosion resistant.
China Beihai adheres to strict international quality standards, ensuring our basalt products are certified for high-performance industrial applications.
Produced by melting natural basalt rock at temperatures ranging from 1,450°C to 1,500°C and drawing it into fibers, this novel inorganic material boasts lightweight strength, weather resistance, corrosion resistance, and eco-friendliness...
Basalt fiber is an inorganic fibrous material produced by drawing strands from natural basalt ore after it has been melted at high temperatures. It has garnered widespread attention for its exceptional physicochemical properties—particularly its performance in high-temperature environments...
Recently, with the successful realization of major applications—such as the Chang'e-6 lunar exploration mission and the world's first deep-sea basalt fiber aquaculture platform—basalt fiber is rapidly accelerating its transformation from a laboratory research outcome...
Browse our complete range of basalt fiber reinforcement products. These materials are engineered to replace traditional steel, offering absolute corrosion protection for chemical pipelines, storage tanks, and industrial concrete structures.
Engineered for crack control and structural integrity in heavy-duty concrete formulations.
Continuous filament roving designed for pultrusion, filament winding, and weaving.
Provides superior resistance to acid rain, chemical fumes, and thermal expansion.
Wholesale basalt fibers offering cost-effective tensile reinforcement for precast pipes.
Innovative 3D structural mesh designed to control shrinkage cracks in concrete linings.
Heavy-duty reinforcement mesh for chemical containment vaults and overhead structures.
Premium basalt strands optimized for industrial-grade concrete pipe manufacturing.
Maximizes impact resistance and load-bearing capacity in corrosive environments.
