Matakai da matakan sakawa na fiber geogrid na basalt fiber

Matakan kwanciya na basalt mai ɗaure biyu-directional geogrid sune kamar haka
1. Za a gyara ƙarshen ɗaya da ƙarfe mai kauri sannan a yayyafa ƙusoshin da aka gyara a ciki da kwalta mai manne a kan ginin, ana iya busar da ƙusoshin ko a harba bindigar ƙusa, sannan a gyara ƙarfin grille a tsaye sannan a raba su, tsawon kowane sashe shine mita 2-5, don shimfidar siminti ta siminti, bisa ga sassan tazara tsakanin haɗin gwiwa. An saita matsayin ƙusoshin ƙarfe a cikin haɗin gwiwa, buƙatun matsin lamba na grille, tsayinsa da kuma juye-juyensa suna cikin yanayin tashin hankali kai tsaye.
2. lokacin kwanciya basalt geogrid, ya kamata a gyara ƙasa da ƙarshen grid ɗin da Φ6mm U-type Sandunan Karfe a kan gangaren da aka haƙa da ƙasa ko matakin cikawa, kuma ginshiƙin tsayi na geogrid mai hanyoyi biyu ya kamata ya kasance daidai da alkiblar tashar. 3. kafin kowane layi na cikewa, ya kamata a gyara geogrid ɗin a saman hanya ta siminti.
3. Kafin kowace Layer na cikawa, ya kamata a fara fitar da layin gefen abin da aka cika (tare da ƙarin faɗi) na kayan cikawa sannan a yi masa alama da farin layin toka.
4. Faɗaɗa shimfidar ƙasa, wanda aka gyara kafin ƙarshen grating ɗin mai sauƙin amfani da katako mai ƙarfi, tare da injina a cikin matse grating ɗin sama da hanyar cikawa, bulldozers na bulldozers, kowane Layer na kauri na shimfidar kama-da-wane na 32 ~ 33cm, motoci da injinan gini ba za a murƙushe grating kai tsaye ba, don guje wa lalacewar grating da lanƙwasa.
5. niƙa, sannan injin niƙa mai girgiza lita 20 don niƙa, bisa ga buƙatun daban-daban na niƙa ƙasa mai rauni, mai kumburi zuwa adadin da ake buƙata bayan gwajin samfurin busasshiyar yawa, don biyan buƙatun ƙira na matse saman Layer na cika ƙasa.
6. Gilashin bayan gida, kowanne cikewa da matse layuka biyu na ƙasa kimanin 50cm, yanke gangaren, ƙasan layin bayan gida na grid zuwa layin ƙasa sama da ≥ 1.0m, da kuma saman layin bayan gida mai sandunan haɗawa.

Saƙa mai lanƙwasa mai kusurwa biyu basalt geogrid ya kamata masu ruwa da tsaki su yi la'akari da wadannan abubuwa masu zuwa
1. Kafin a shimfiɗa, ya kamata a cire ƙwanƙolin da suka fito, sannan a taƙaice wurin ginin kuma a daidaita shi, sannan a daidaita wurin ginin, sannan a cire ƙwanƙolin da suka fito.
2. Alkiblar babban ƙarfin taurin kayan ƙarfafawa ya kamata ta kasance bangon sarari mai kusurwa huɗu, wanda goro ya gyara ba tare da canzawa ba.
3. Ba za a ja shimfidar da ta yi tsauri sosai ba, kuma gabaɗaya faɗin kowanne mita zai zama 1-2cm. Idan tsayin shimfidar ya fi girma ko ya fi girma, saita tsawon shimfidar bisa ga buƙatun ƙira.
4. Ya kamata a yi amfani da kayan aikin geosynthetics ɗin da aka shimfiɗa a kan dutse, su kasance masu ƙarfi, kuma an haɗa su da kwalta.